Honest Electric Cleaning Power That Lives Inside The Safe Detailing Window
WashForge pairs a 1800W motor with a 1-180° nozzle and built-in water filter — delivering 1.6 GPM volume real foam cannons need, without the 3000+ PSI that strips clear coat. Still pulling brake dust off the wheel barrel month 14 in.
Low Stock - Selling Fast
Couldn't load pickup availability
- Apple pay payment method
- American express payment method
- Master payment method
- Visa payment method
- Discover payment method
- Jcb payment method
- Unionpay payment method
- Diners-club payment method
- Google pay payment method
This product is not available on Amazon or eBay. You are purchasing directly from the only authorized seller — which means full warranty, verified authenticity, and dedicated customer support. Beware of counterfeit listings on third-party marketplaces.
How It Works
How It Works
- Connect garden hose to the M22 inlet — built-in filter blocks grit before it touches the pump.
- Plug the 5.5m cord into a covered outdoor outlet — no extension cord needed on wet ground.
- Attach the 7m outlet hose and lance — twist-lock fittings, no tools.
- Dial the nozzle from 1° pencil to 180° fan with a thumb twist on the wand.
- Pull trigger — 110 bar / 360 l/h hits the surface, 1800W motor holds the line.
- Release trigger — pump cycles down, hooks fold up, full setup stores on a garage shelf.
What's Included
What's Included
- WashForge 1800W electric pressure washer body
- 7-meter reinforced outlet hose with M22 fittings
- Adjustable 1-180° spray lance and trigger gun
- 5.5-meter mains power cord with waterproof switch
- Detergent suction tube for foam-soap pre-wash
- Built-in water inlet filter (replaceable)
- Integrated storage hooks for hose and cable
Shipping & Returns
Shipping & Returns
We offer free shipping for all orders. Order processing
takes 1-3 business days before shipment. Once your item/s is dispatched,
the estimated delivery time is:
- USA: 2-12 business days
- UK: 5-13 business days
- Australia: 5-13 business days
- Canada: 2-12 business days
- Europe: 5-13 business days
WashForge
Four Specs That Decide Whether This Washer Is Still Running In Year Three
1.6 GPM Volume At 110 Bar
360 l/h is the flow rate foam cannons need to atomize at 1.1mm orifice. Pressure does the rinse. Volume does the foam.
5.3 kg Carry-Around Weight
Light enough for one hand around a pickup, heavy enough to stay planted when you yank the 7m hose taut.
Built-In Water Filter
Pump intake debris kills cheap units in two seasons. The mesh screen catches grit before it scores the pump cylinders.
1-180° Nozzle At The Trigger
Twist from a 1° pencil for wheel barrels to a 180° fan for clear-coat rinse without swapping tips mid-wash.
What our 17,000+ Customers say
Based On Real and Honest Experiences
WashForge changed how I wash the car on Saturday mornings. I used to dread the foam stage because my old unit dribbled soap that ran off in seconds. Now the cone clings on the door for a full minute and I actually enjoy the pre-rinse.
Bought this specifically for winter brake dust and road salt on my commuter. The 1-180° nozzle backs off wide enough that I can rinse the clear coat without flinching. First washer where I stopped worrying about lifting paint.
Was skeptical because I have killed three electric washers in four years. Fourteen months in and the pressure is still where it was on day one. The water filter is the difference — every cheap unit I owned skipped that part.
Frequently Asked Questions
How loud is it compared to a gas unit?
How loud is it compared to a gas unit?
Sits between gas and a Kranzle. Quiet enough that you can wash a car at 7am without a neighbor knock — quieter than a shop vac, louder than a dishwasher. The 1800W motor hums at a steady pitch, no exhaust, no fumes inside the garage.
Is 110 bar safe on automotive paint and clear coat?
Is 110 bar safe on automotive paint and clear coat?
Yes. 110 bar is roughly 1600 PSI, inside the 1500-2000 PSI window detailers recommend. Anything over 2500 PSI is where paint-lift and trim damage start. The 1-180° nozzle backs off to a wide fan on clear coat and dials tighter only on wheels.
Will my MTM PF22 foam cannon work with this unit?
Will my MTM PF22 foam cannon work with this unit?
Yes. The 360 l/h (1.6 GPM) flow rate clears the threshold most foam cannons need to atomize at a 1.1mm orifice. Owners running 1.2 GPM machines report soup instead of suds. With this unit the cone clings on a vertical panel for 60-90 seconds.
Does the outlet hose kink the way the Sun Joe and Ryobi hoses do?
Does the outlet hose kink the way the Sun Joe and Ryobi hoses do?
The 7m outlet line stays flexible cold, and the integrated storage hooks coil it without tangles. It is not a Kranzle steel-braid hose, but it does not kink under its own coil and does not yank your wrist when you walk around the car.
How long does the pump actually last under weekly use?
How long does the pump actually last under weekly use?
The built-in water inlet filter decides this. Pump intake debris kills cheap units inside 12-18 months. With the mesh screen catching grit, owners report weekly washes past month 14 with no pressure drop and no leak from the casing.
Can I run it without a covered outlet on a rainy driveway?
Can I run it without a covered outlet on a rainy driveway?
The power switch is sealed waterproof and the unit ships with a 5.5m cord, so you reach a covered exterior outlet without an extension cord. An extension cord across a wet driveway is the dangerous setup the longer cord eliminates.
Will it fit a standard M22-15mm foam cannon and lance?
Will it fit a standard M22-15mm foam cannon and lance?
Yes. The trigger gun uses a brass M22 fitting that accepts M22-15mm cannons, lances, and quick-disconnects forums recommend. No 14mm proprietary fittings that lock you out of the aftermarket — the connection is what detailers already run.
What if I want to use it on the patio or fence after washing the car?
What if I want to use it on the patio or fence after washing the car?
Twist the nozzle to a tighter cone for moss between pavers, back off to 180° for siding rinse. The 1800W motor holds 110 bar through a long patio session, and the 7m hose covers the gap from outlet to back fence on most suburban driveways.