• ClickTrue™ - 50% OFF TODAY

  • ClickTrue table saw miter gauge
  • pp-clicktrue-table-saw-miter-gauge-p2_v1
  • pp-clicktrue-table-saw-miter-gauge-p5
  • pp-clicktrue-table-saw-miter-gauge-p7_b1_g2
  • pp-clicktrue-table-saw-miter-gauge-p8_b2_g2
  • pp-clicktrue-table-saw-miter-gauge-p7_b3_g2
  • pp-clicktrue-table-saw-miter-gauge-p4_v3_r10015
 Rated 4.8 Excellent - Trusted By 17,000+

ClickTrue ™

$319.99
$319.99
SAVE Liquid error (snippets/price line 116): Computation results in '-Infinity'% Sold out
 

check_circle Click into your 45s without eyeballing

check_circle Hold long boards steady on the fence

check_circle Repeat identical cuts with a flip stop

check_circle Keep a firm grip on every push

Low Stock - Selling Fast

SUMMER SALE — [pct]% OFF + [gifts] FREE GIFTS --:--:--
Low stock available Fast Shipping

Order today and it ships by -
  • Apple Pay
  • American Express
  • Mastercard
  • Visa
  • Discover
  • JCB
  • Union Pay
  • Diners Club
  • Google Pay
 

  • Check your saw's miter slot against the 0.75 x 0.375 in (19 x 9.5 mm) fit.
  • Slide the bar into the slot. The head and bar arrive pre-assembled.
  • Turn the head to one of the 15 positive stops.
  • Set the red flip stop on the fence ruler, then push the board through.

  • Miter gauge head and bar, pre-assembled
  • Handle
  • Fence with 18 in (457 mm) grating
  • Grating limiter
  • 3 hex wrenches, 2 mm (0.08 in), 3 mm (0.12 in) and 4 mm (0.16 in)
  • Open spanner

Once your item/s is dispatched,
the estimated delivery time is:

- USA: 2-9 business days
- UK: 5-13 business days
- Australia: 5-13 business days
- Canada: 2-12 business days
- Europe: 5-13 business days

You have 90 days to return your product for a full refund (return shipping is covered by the customer; defective items ship a free replacement).

✓ Official Authorized Retailer

This product is not available on Amazon or eBay. You are purchasing directly from the only authorized seller — which means full warranty, verified authenticity, and dedicated customer support. Beware of counterfeit listings on third-party marketplaces.

ClickTrue table saw miter gauge

ClickTrue

 4.8/5
View full details

  • Over 17,000 recommend ClickTrue

Built around the cuts you repeat most

straighten

Click into the angles you use most

Skip the eyeballing every time you turn the head. 15 positive stops, 90 degrees at the center.

swap_horiz

Support long boards, repeat every length

Long boards stay supported and repeat cuts stay matched. The 18 in (457 mm) aluminum fence has a printed ruler and a red flip stop.

ClickTrue
tune

Nudge the stop right onto your mark

Fine-tune by hand until the stop lands where you want it. Convex and concave grating with fine-tuning knobs does the work.

back_hand

Keep your grip, read angles your way

Your hand stays put through the push. The knurled non-slip handle comes with a laser-marked imperial and metric angle plate.

Frequently Asked Questions

verified +347 experts reviewed it as the best choice in 2026
Q1 Will it fit my table saw's miter slot?
It is made for a miter slot of 0.75 x 0.375 in (19 x 9.5 mm). Measure your slot's width and depth first. If they match, you're set.
Q2 What angle stops does it have?
There are 15 positive stops: 90 degrees at the center, plus 15, 22.5, 30, 35, 45, 60 and 67.5 degrees on each side. That covers the angles most frames, boxes and trim call for.
Q3 Can I use it on an inverted band saw?
Yes. It is made for table saws and inverted band saws with a 0.75 x 0.375 in (19 x 9.5 mm) miter slot. Measure your slot first and compare it with that size.
Q4 How do I repeat a length with the fence scale?
The fence has a printed ruler, a red flip stop and fine-tuning knobs. Set the stop, nudge it to your mark with the knobs, and repeat that length on every piece.
Q5 Do I have to assemble it?
Very little. The gauge head and bar arrive pre-assembled, and you attach the remaining parts. Three hex wrenches and an open spanner come in the set, so you won't need to find tools.
Q6 What is it made of?
Sturdy aluminum that doesn't feel flimsy in your hands. It is 6063 aluminum profile, extruded and CNC machined, with an anodized finish, and weighs 1.61 kg (3.6 lb).
Q7 Who is it for?
Hobbyist woodworkers who cut frames, boxes and trim. The positive stops set your angles, the long fence supports the board and the flip stop repeats lengths.
50% OFF ClickTrue

Ready to make it yours?

Get ClickTrue at today's price with your free gift included — and a full 90 days to enjoy it.

4.8/5 by 17,000+ customers 90-Day Money-Back Fast Shipping
shield_lock 100% Secure Payment
delivery_truck_speed Fast Shipping
support_agent Premium support
star_shine Reviewed Top 1 in 2026